Is GSM Flasher ADB Legit? Full Review To Bypass Your Poco C51 Phone FRP Lock

When encountering factory reset protection (FRP) locking on your device, the search for solutions often leads to recommendations for the GSM Flasher ADB Bypasser FRP tool.

But before you are thinking of using it, make sure you understand its features, benefits, and how to download and use this tool effectively. This article provides you a comprehensive overview of the GSM Flasher Adb Bypass FRP tool, covering essential information that will guide you through the FRP bypass process.

Part 1. Full Review of the GSM Flasher ADB Bypasser FRP Tool

The GSM Flasher ADB Bypasser FRP tool is a reliable solution designed for users encountering FRP activation on their Android devices. It offers a quick and effective solution to regain access to your locked device by bypassing the FRP lock in just a few minutes.

To help you make an informed decision about using this tool, let’s explore its key features:

• Helps you to unlock various screen locks on Android, including patterns and PIN locks
• Exhibits broad compatibility, extending its support to a majority of Android devices
• Free of charge

While the GSM Flasher ADB Bypass FRP boasts a visually appealing interface, it’s worth noting that the software may present a steeper learning curve for some users. If you are not familiar with Android debugging and ADB processes, you might find the initial setup somewhat challenging.

GSM Flasher ADB Bypasser FRP compatibility list

The GSM ADB FRP Tool is compatible with a wide range of Android devices and Windows operating systems. Here’s the breakdown of its compatibility list:

Android:

Android 5.1 Lollipop, Android 6 Marshmallow, Android 7 Nougat, Android 8 Oreo, Android 9 Pie, Android 10, Android 11, and Android 12.

Windows:

Windows XP, Windows 7, Windows 8, Windows 10, Windows 11 (X32 and X62 bit).

Supported phone models

Pros and Cons of Using GSM Flasher ADB Bypass FRP Tool

Dealing with FRP lock using the GSM Flasher tool also comes with its share of drawbacks. Let’s break down its strengths and weaknesses to help you decide if it’s the right fit for your needs.

Pros:

• A free solution to unlock their Android devices from FRP lock
• While it works with other Android devices, Samsung users have higher success rates of unlocking their devices with this tool

Cons:

• You need to disable antivirus software when using the tool, raising security concerns
• The tool does not work uniformly across all Android devices and versions
• The tool’s usability may pose a challenge, especially for beginners

Part 2. How To Use GSM Flasher ADB Bypasser FRP Tool

Now, we are moving on to the crucial aspect: How to use the GSM Flasher FRP tool. Employing this tool to unlock your Android device from FRP lock requires a systematic approach. If you’ve decided to use this bypasser FRP tool, the first step is to download GSM flasher tools and install them from this link.

Once the installation is complete, you can proceed with the following step-by-step guide to efficiently use GSM Flasher ADB Bypasser FRP and regain access to your locked Android device.

• Step 1: Make a connection between your phone device and your PC

After completing the tool download, employ a USB cable to connect your Poco C51. The GSM Flasher FRP tool will be recognized by your Android device, while the tool will identify the name and Android version of your connected device at the same time.

• Step 2: Perform FRP lock bypass

Proceed by clicking “Remove FRP” on your computer. It’s essential to be aware that this process will require a few minutes, so be patient until the tool successfully unlocks the FRP lock on your phone.

Part 3. Quick and Easy Bypasser FRP Tool Alternative

If your phone model is not compatible with GSM Flasher ADB or if the tool doesn’t seem to suit your needs, a reliable and swift alternative for FRP bypass is Wondershare Dr.Fone. Dr.Fone offers the Screen Unlock feature that is intricately crafted to streamline the FRP bypass process, ensuring both ease and efficiency.

Additionally, Dr.Fone offers support for a vast array of over 2000 Android phone models, providing a comprehensive solution that caters to a more diverse range of devices.

List of features:

• Supports a vast range of iOS and Android device models
• Minimizes the risk of data loss during the FRP unlocking process, preserving crucial files and information
• Dependable to unlocking Android devices when faced with forgotten screen lock credentials

How to bypass Google verification using Dr.Fone’s Screen Unlock:

• Step 1: Launch Dr.Fone Screen Unlock and connect Android device.

Launch Wondershare Dr.Fone on your computer and connect your Android devices. Go to Toolbox > Screen Unlock.

• Step 2: Select Remove Google FRP Lock.

On the next screen, choose Android as your device type and select Remove Google FRP Lock to proceed.

• Step 3: Select the Android device model.

Pick your Android device model and proceed by clicking the Start button.

• Step 4: Choose the Android version.

Now, specify your Android version. If you’re unsure about the Android OS version on your Android or prefer the quickest method to eliminate the Google Lock, select the All Android versions (One-Click Removal) option. Click “Start” to continue.

• Step 5: Follow the instructions to access an Emergency Call.

Follow on-screen instructions to open Emergency Call on your Android. Dial #0# to open a secret menu and click Next on your computer.

• Step 6: Enable USB debugging.

Now, your Android screen will display a notification to enable USB debugging. Once you grant permission on your phone device, proceed to click “Authorized” on your computer screen.

On your computer, the next screen will show that the FRP lock is being removed from your Android device. Once it’s successfully removed, a window will pop up saying it’s done. Click “Done” if you’ve completed the process successfully.

Tips: Are you searching for a powerful FRP Unlock tool? No worries as Dr.Fone is here to help you. Download it and start a seamless unlock experience!

Conclusion

The GSM Flasher ADB Bypasser FRP tool offers a cost-free and versatile solution to bypass FRP locks on a range of Android devices. While it provides an effective means to unlock your device, you might need to consider its compatibility, potential legal implications, and the learning curve associated with its usage.

As an alternative, tools like Dr.Fone can be explored for additional compatibility and ease of use. And, of course, the choice between these tools depends on your preferences and specific device requirements.

Hassle-Free Ways to Remove FRP Lock on Poco C51 Phones with/without a PC

“I just bought a used Poco device from the mobile market without checking the already signed in Google account, and I don’t even know what Gmail ID is added to this device, so I’m looking for FRP Poco bypass tools. Please help.” A user says so on Quora.

In all such and similar situations when you have authorized access to your Poco or any other Android device, but not the right Google credentials, the need for a tool that can bypass the lock arises. The content below will take you through these FRP bypass Poco tools.

Part 1. Can I Bypass Google Lock on Poco ?

Yes, the Google Lock on Poco can be bypassed using an FRP bypass tool. Although in case of theft and loss, the FRP lock is a great feature, but on the flip side, in a situation where you forget your Google credentials, the function can be more of a problem than of use. Additionally, if you have got a hand on a second-hand device having an FRP lock, then also you would be in trouble accessing the phone.

You can choose between tools without a computer as well as PC-based programs to bypass and remove the Google Account. Once the account is removed using the tools, the following will be the benefits.

• You will have complete access to your Poco device and its features.
• Once the lock is removed, it will completely de-link from the previous Google account and hence cannot be blocked or traced by the previous owner.
• You can permanently delete the Google account.

Part 2. How to Bypass Google Lock on Poco Without Computer? (30 Min & Free)

To remove the Poco FRP bypass without using a system, the EMERGENCY CALL method can be used. Though this method is free, it is lengthy and complicated.

Steps for Poco FRP bypass without computer

• Step 1. Connect your Poco phone to a Wi-Fi and then switch it on for the HELLO screen to appear. Next, select the Emergency Call option and then click on Emergency Information two times.
• Step 2. On the Emergency Information page, tap on the Pencil icon and Name. Next, click o the profile icon and select the option of changing an image.

• Step 3. Next click on Menu > Photos > Permissions. Click on the Contacts options and select See All apps with this permission.
• Step 4. Click on the Search > Settings> Settings App Info > Open. With this, you will enter the Settings section of the Poco C51 device, after which select Accessibility > Accessibility Menu and turn in On.
• Step 5. Go back to the settings and choose Apps & Notifications > App Info. The list of the app will appear, and now you will have to disable some apps for the FRP process.
• Step 6. Choose 3 dots > Show System Apps and then click on Android Setup > Force Stop > OK.
• Step 7. Using the Storage & Cache option, wipe off the Storage and the Cache. Click Disable > Disable App.
• Step 8. Next, click on the blue settings icon of Android Setup and click on Force Stop.
• Step 9. From the Android Setup, remove all the storage and the cache data. Next click on Google Play Services > Disable > Disable App.
• Step 10. Now you need to go to the main Hello homepage by clicking on the back arrow multiple times. Select the Start option and the Poco C51 device screen will start loading.
• Step 11. When the updates are being checked by the screen, go back to the Wi-Fi connection page.
• Step 12. Open the Shortcut Menu by swiping up from the bottom to the top using 2 fingers.
• Step 13. Click Assistant > Settings > Enable Google Play Services. Move back and select Skip > Continue.
• Step 14. Click on More > Accept.
• Step 15. At the Set Screen Lock, click Skip > Skip > OK > Accept & Continue and then go to the home screen.
• Step 16. Finally, to bypass google lock on Poco without pc, go to Settings > System > Advanced > Reset Option and here choose to Erase All Data options 3 times.

Part 3. How to Bypass Google Lock on Poco with Computer? (15 Min but Paid)

If you have access to a computer, Motoreaper is a decent Poco FRP tool for Poco FRP bypass with computer. Developed by the Phonlab team, Motoreaper is a Windows-based tool that works on the majority of Poco devices including Moto E, Moto X, Moto G, Droid Turbo, Droid Maxx2, and others.

Steps for Poco FRP bypass using Motoreaper

• Step 1. Download and install the Motoreaper software on your system and launch the same.

• Step 2. Now you need to get your Poco phone into bootloader mode and for this, you need to power off your device and then turn it on by pressing and holding the power and volume down buttons together for a few seconds.
• Step 3. Next, connect your phone to your PC using a USB cable and the software will successfully show the connected device.

• Step 4. Next, unplug your Poco phone and boot it into the factory model using the bootloader mode by pressing the power and volume down button. When the factory mode appears, use the power button to select it.
• Step 5. Now connect your phone again to your system and let it boot up completely. Next, click on the I have Done option.
• Step 6. Now your device is on the factory mode where you need to click on, the I Confirm option.
• Step 7. Next for Poco Google bypass, use debugging in your device and then tap on I confirm at Moto Rapersoftware.
• Step 8. The Unlock No button will appear in the Moto Reaper software which you have to click after which the Google bypass Poco process will be complete and the FRP lock will be removed.

Part 4. How to Unlock Poco Phone Passcode? (5 Min)

Besides FRP lock, the screen lock of your Android phones including Poco is one of the most common situations. So, if to have forgotten your screen lock code or have a device with a locked screen, the best tool we reconned is Dr.Fone - Screen Unlock (Android) . This simple system-based software will let you remove all types of screen locks – PIN, password, pattern, as well as a fingerprint in a few simple and quick steps. The software is reliable and safe without causing any harm to your device.

Dr.Fone - Screen Unlock (Android)

Get into Locked Poco within Minutes

• 5 screen lock types are available: pattern, PIN, password, fingerprints & Face ID.
• Easily remove the lock screen; No need to root your device.
• Everybody can handle it without any technical background.
• Provide specific removal solutions to promise good success rate

4,008,671 people have downloaded it

• Step 1. Launch the installed software on your system and from the main page, choose the Screen Unlock option.

• Step 2. Using a USB cable, connect your phone to your system and then select Unlock Android Screen option on the software interface.

• Step 3. From the supported list on the software interface, select Poco .

• Step 4. Your Poco phone will enter into a dedicated mode. Once in this mode, Dr.Fone will initiate the Poco screen unlock process.

• Step 5. When the process is complete, you can access your Poco device without any need for a password.

safe & secure

Conclusion

Poco FRP lock can be removed using the Emergency Call option or the above-mentioned Motoreaper tool. For removing any type of screen lock without password on your Android devices, Dr.Fone – Screen Unlock (Android) works as the best option.

A Step-by-Step Guide on Using ADB and Fastboot to Remove FRP Lock on your Poco C51

Factory Reset Protection is one of the security measures available on Android 5.1 and later devices to prevent intruders’ unauthorized factory resetting of the Poco C51 device. Among the several ways to fix this issue and remove the lock, one is ADB and Fastboot commands. So, if you are aware of using Android Debug Bridge, the below content will help you understand how it can be used to remove the FRP lock.

You can watch the video below to bypass FRP lock without hassle!

Part 1: Quick Overview of ADB and Fastboot Commands

1. What are ADB and Fastboot?

Standing for Android Debug Bridge, ADB and Fastboots are the methods through which communication with an Android device can be done through a computer. Under this method, the commands and the actions that are sent from the system are performed on your Android device.

Several issues can be resolved, and multiple functions can be performed using the ADB format tool and Fastboots, and this also includes removing the FRP lock on your Android device. To use this method, USB debugging should be enabled on the Poco C51 device.

For specific brands of Android phones, specific utility tools are available like the Vivo ADB format tool and the Samsung ADB format tool, which are used explicitly for Vivo and Samsung phones, respectively.

2. How Do ADB and Fastboot Bypass FRP?

Using the versatile ADB command-line tool and Fastboots, the Google FRP lock can be removed using several commands depending on the OS version. This is a client-server program that includes a client who sends the commands, a daemon used to run the commands on the Poco C51 device, and a server that facilitates communication between the client and the daemon.

ADB comes included in the Android SDK Platform-Tools package, and this can be downloaded using the SDK manager.

3. What Are the Android Versions that ADB and Fastboot Command Support?

The Android versions on which ADB and Fastboot commands can be used are as follows:

• _Android 5 – Lollipop_
• _Android 6- Marshmellow_
• _Android 7 – Nougat_
• _Android 8- Oreo_
• _Android 9- Pie_
• _Android 10 – Q (expected to work though not tested as yet)_

Part 2: How to Set Up ADB and Fastboot Commands to Remove FRP Lock on Android?

To remove FRP lock using ADB, you first need to install and set up ADB and then remove them using the command. The steps for the same are enlisted below.

Steps to remove FRP using ADB

• Step 1. Firstly, download the ADB installed setup file and then extract the files from the toolkit on your system in a folder.

• Step 2. Next, you need to run adb.setup.exe and then type Y for installing the drivers for ADB and Fastboot.

• Step 3. Again, enter Y for installing the drivers and when done successfully, the command window will close.

• Step 4. Next, power on your Android device and connect it to your PC using a USB cable. Here also ensure that USB debugging mode is enabled on your Android device.

• Step 5. Next, hold down the Shift key and then right-click at any place blank in the ADB folder, and then choose the Open command window here option.

• Step 6. Now to remove the FRP you need to enter the following commands at the command prompt one by one where enter needs to be clicked after every line.

• _Adb shell am start -n com.google.android.gsf.login/_

• _adb shell am start -n com.google.android.gsf.login.LoginActivity_

• _adb shell content insert –uri content://settings/secure –bind name:s:user_setup_complete –bind value:s:1_

• Step 7. The above commands are for Samsung devices. If you want to remove the FRP on other brands, enter the following commands:

• _Adb shell content insert –uri content://settings/secure –bind_

• _name:s:user_setup_complete –bind value:s:1_

After the execution of the commands, the FRP lock will be removed from your Android device.

Steps to remove FRP using Fastboot

• Step 1. Put the Android device into the bootloader or fastboot mode. (depending on the model and brand of your Android device, the process of entering into the fastboot will differ).

• Step 2. Connect your phone to your PC using a USB cable.

• Step 3. Next, depending on the system, enter the following command in the CMD window:

• _Lenovo FRP command_

• _fastboot erase config_

• _fastboot reboot_

• _XIAOMI FRP command_

• _fastboot -w_

• _MICROMAX YU YUPHORIA FRP_

• _Fastboot -i 0x2a96 erase configFastboot -i 0x2a96 reboot_

• _DEEP/HTC/Other Brands FRP_

• _fastboot erase configfastboot reboot_

Part 3: Limitations of Using ADB and Fastboot Command Method

The ADB and Fastboots command is a workable solution for removing the FRP lock on your Android device, the drawback is that the method is quite complicated and requires thorough technical know-how of ADB and its working. There are several limitations associated with this method as enlisted below.

• Requires technical know-how

To remove FRP using the ADB command you need to have a thorough knowledge of using the tool. The tool has a deep learning curve which makes this method little for the majority of the users.

• Might not unlock the phone

You can try the ADB method for removing the FRP lock but there is no guarantee that the results will be positive and your device will be unlocked.

• Issues with the drivers

Several times while using this method, you might encounter driver issues when your device is not detected as proper drivers are not installed.

• Unexpected issues and errors

ADB is a command-based method, and thus it is important that the commands are entered right. If there is a slight error in the typing of the command, it might lead to major issues and can even be the Poco C51 device damaged.

• The process is not user-friendly

ADB is a technical process aimed toward the geeks, and thus the overall process is not user-friendly and complicated.

Part 4: The Best ADB Alternative to Bypass FRP Lock on Android Phones

Considering the several limitations of the ADB and Fastboot command method, the need for a simple, user-friendly, and workable solution for removing FRP lock on Android devices arises. One of the best software here that we recommend is Dr.Fone - Screen Unlock (Android) which helps in removing and bypassing many Android phone screen locks including the one appearing due to FRP lock.

Dr.Fone - Screen Unlock (Android)

Remove Google FRP on Samsung without PIN code or Google accounts.

• Pattern, PIN, password, fingerprints & face screen lock can all be unlocked.
• Bypass Google FRP on Samsung without pin code or Google accounts.
• No tech knowledge asked, everybody can handle it.
• Work for Samsung, Xiaomi, Redmi, OPPO, etc.

4,005,551 people have downloaded it

The process of using the software is user-friendly and thus can also be used by non-techy users.

Steps for removing FRP lock on Android using Dr.Fone Screen Unlock

• Step 1. Launch the installed software and choose the Screen Unlock option from the main interface. Choose Android and then select the Remove Google FRP Lock option.

• Step 2. Select the model brans from the options shown on the interface, and then connect your phone to your PC using a USB cable. The connected device details will appear on the interface.

• Step 3. Follow the next steps as they appear. Once the FRP lock is successfully removed, the prompt window will show its completion. Click Done if you have successfully executed the process.

The above is the brief steps for the process. You can check the bypass Samsung FRP lock guide in detail.

Conclusion

If you are well versed with the commands of ADB and Fastboots you can go ahead and use the ADB bypass FRP tool for removing the FRP lock but if this command line method seems complicated for you, Dr.Fone Screen Unlock is the best tool to use.

Also read: