5 Quick Methods to Bypass Motorola Defy 2 FRP

Google Factory Reset Protection, a.k.a FRP, is developed by Google for all Android phones. It adds an extra layer of security to your phone and the data on it. It is aimed at making it difficult for the illegal holder of your phone to factory reset your phone and remove tracking information. Then why do we need to discuss the Motorola Defy 2 FRP bypass?

Though the protection is meant for you, sometimes you may forget the password and want your Motorola Defy 2 FRP removed. Also, if you bought a used phone and the previous user has set up FRP with her password, you need to bypass it.

Part 1: In what cases does the Motorola Defy 2 FRP bypass works?

How and why should I bypass Motorola Defy 2 FRP? Let us look at the valid reasons.

1. Buy a locked second-hand Motorola

When you buy a second-hand phone, ideally, the previous user must format and hard reset the Motorola phone to remove all locks and password requirements. However, if it doesn’t happen, you cannot use some options on your phone and configure security because of FRP. Here, your savior is the option of the Motorola Defy 2 FRP bypass.

2. Forget Google account ID and password

Even if you have locked your Motorola phone yourself, you are stuck when you forget your Google username and password. So, you can only recover your phone using the Motorola Defy 2 FRP bypass.

3. The person with a Motorola from his company no longer works for it

Some employees also receive official phones from their company which they have to return when they leave the company. Now, it becomes a horror story for the new employee if he gets the same phone locked with the previous user’s ID.

Part 2: 5 quick methods to bypass Motorola Defy 2 FRP

Ok, now this is established that there are certain situations when you need to conduct a Motorola Defy 2 FRP bypass. So how do you do the Motorola Defy 2 FRP bypass?

Method 1. Retrieve your Google account from another device

If your phone is locked with a Google account whose password you do not know or have forgotten, then you can use this method to Motorola Defy 2 FRP bypass. In this method, you can try to retrieve your Google account from another device. It is a simple step-by-step process tha can be completed from a PC or another mobile device.

If you have forgot the email address but remember the password, then follow these steps.

1. Navigate to Google’s Find My Email page in your browser.

When you can’t remember the email address that was configured, go to the Find My Email page and start account recovery process.

2. Enter your recovery email or phone number

On the next screen, provide a recovery email or phone number and click Next.

3. Provide your first and last name

Enter your first and last name in the given form and click Next.

4. Verification code

Google will send a verification code to the setup recovery email or phone number, click Send.

5. Verification code entry

Check your email inbox or phone messages depending on the recovery method and find the verification code. Enter it in the given form. If it is correct, you can go to the next final step.

6. Choose an account

From the list of accounts showing on the screen, select the account you want to recover.

7. Enter your password

Enter the password in the text box and you are done.

If you remember the email but not the password, then the Motorola Defy 2 FRP bypass method will go like this.

1. Google’s Account Recovery page

Navigate to the Account Recovery page from the browser on your PC or other mobile devices.

2. Enter your email address

Fill in the form with your Google account and click Next.

3. Enter the last password you remember

The next form will ask you to enter the last password you remember and that worked

Now, you will receive a message to your registered device, to verify it’s you. Open it and click , Yes, it is me.

Now, wait for six hours for Google to verify it’s you and then they will send a password reset link to your email.

Now, what if you can’t remember your last password, then use the next method.

4. Click on “Try another way”

Now Google will send a message to your phone to verify it’s you. On your phone, open the message and click Yes, it’s me.

After verification, Google will send you a password reset link after six hours.

If your phone is not registered in your Google account then, try the next method.

5. Click on “Try another way” again

If your phone is enabled to check for the code, click Try another way again.

Google will then ask you to send a verification code to your registered phone number. Click Send.

Find the code from your messages, enter it, and click Next.

Now again, you will wait for six hours till Google sends the password reset link to your email.

Method 2. Use FRP Bypass APK

FRP bypass APK is another tool you can use to Motorola Defy 2 FRP bypass easily. Let us see how it works step by step.

• Download FRP Bypass APK for Motorola Defy 2 FRP bypass android 11.
• Once it’s downloaded, open the File Manager using the Open Files app
• Find the suitable Apk and click on it
• Install & open the APK.
• Open the browser on your phone.
• Launch any of these two below URL.
  • https://tiny.cc/frptools
  • https://bit.ly/2NKxXYs
• Go to the FRP bypass APK >FRP APPS section
• Open Settings leading to the Motorola Defy 2 device Settings>System Settings> Backup & Reset >Reset Phone
• Now click on Reset System Settings Only, and confirm Reset System Settings Only.
• Select Erase All data and confirm.
• Your device will be rebooted.
• Wait till the factory reset process completes.

Now, reboot your device and set it up according to your requirements.

Method 3. Deactivate FRP

Another way to come around Motorola Defy 2 FRP bypass is to deactivate FRP. Let us follow the step-by-step process.

1. Launch the “Settings” app and scroll to the Apps.
2. Click on the “Manage apps” (applications) and then the “All” tab.
3. Open “Google App.”
4. Click on the “Clear cache” to remove the Google account cache.

5. Also, clear all data to erase data stored.
6. Click the “Back” button, and go to “Gmail.”
7. Click on the “Clear cache” and “Clear data.”

8. In the Motorola Defy 2 device Settings menu and click “Data synchronization.” When your device asks you to enter your Google account, enter your new Gmail account.

You have successfully completed the Motorola Defy 2 FRP bypass process.

Method 4. Bypass with SideSync

You can use SideSync to share the screen and data between your computer and mobile phone. How can we use this for FRP bypass?

1. Download the SideSync from the official site and install the SideSync application on your computer.

2. Connect your phone and computer to the Google account verification screen.
3. Now plug in the first end of your OTG adapter with your phone and connect another end to the flash drive with APK.
4. Your phone will launch the file explorer automatically, showing the root directory of the flash drive.
5. Now click on the APK file.
6. Click Settings and allow to install from Unknown sources, and click OK.
7. After installation, open SideSync.
8. Disconnect the OTG cable from your Samsung phone.
9. Now access the Settings menu and go to the Backup & reset option and conduct a factory reset.

Method 5. 3 Steps to Bypass Motorola FRP Bypass

Dr.Fone - Screen Unlock (Android) is a reliable and efficient tool designed to help users bypass FRP (Factory Reset Protection) locks on Android devices, including Motorola smartphones. This powerful software provides a hassle-free solution for those locked out of their Motorola devices due to FRP lock. With its user-friendly interface and advanced features, Dr.Fone makes FRP bypassing a straightforward process, even for users with limited technical knowledge.

Dr.Fone - Screen Unlock (Android)

Remove Google Lock (FRP) from Motorola Devices

• Pattern, PIN, password, fingerprints & face screen lock can all be unlocked.
• Bypass Android FRP lock without a PIN or Google account.
• Unlock mainstream Android brands like Samsung, Motorola, Xiaomi, etc.
• No tech knowledge required, Simple, click-through, process.

3,981,454 people have downloaded it

3 Steps to Bypass Motorola FRP Lock with Dr.Fone - Screen Unlock (Android)

• Step 1. After installing Dr.Fone - Screen Unlock (Android), launch the program and select the “Screen Unlock” option from the main menu. Continue to Android > Remove Google FRP Lock.

• Step 2. Then select Motorola and click the Start button to continue. Then, connect your locked Motorola device to the computer using a USB cable. Ensure that USB debugging is enabled on your Motorola device before proceeding with the next steps.

• Step 3. Once your Motorola device is successfully connected, Dr.Fone - Screen Unlock (Android) will automatically detect it. Follow the on-screen instructions to put your Motorola device into specic mode. Once in the correct mode, Dr.Fone will start downloading the necessary firmware to bypass the FRP lock.

During the process, it’s crucial to keep your device connected to the computer and refrain from disconnecting it until the bypass is complete. After the firmware download is finished, Dr.Fone will initiate the FRP lock bypass process. Once completed, your Motorola device will restart, and you’ll regain access to it without encountering the FRP lock.

safe & secure

The Bottom Line

FRP is a great feature to add security to Android phones. However, sometimes it is necessary to bypass it to fully use your phone. When you are stuck with an FRP lock, it is a frustrating situation, especially when you want to factory reset your phone. We have described various methods so that you choose the best solution according to your requirements for the Motorola Defy 2 FRP bypass. Among them, bypassing Motorola FRP lock is made simple and efficient with Dr.Fone - Screen Unlock (Android). Say goodbye to FRP lock frustrations and regain access to your Motorola device swiftly with Dr.Fone - Screen Unlock (Android) .

safe & secure

A Step-by-Step Guide on Using ADB and Fastboot to Remove FRP Lock on your Motorola Defy 2

Factory Reset Protection is one of the security measures available on Android 5.1 and later devices to prevent intruders’ unauthorized factory resetting of the Motorola Defy 2 device. Among the several ways to fix this issue and remove the lock, one is ADB and Fastboot commands. So, if you are aware of using Android Debug Bridge, the below content will help you understand how it can be used to remove the FRP lock.

You can watch the video below to bypass FRP lock without hassle!

Part 1: Quick Overview of ADB and Fastboot Commands

1. What are ADB and Fastboot?

Standing for Android Debug Bridge, ADB and Fastboots are the methods through which communication with an Android device can be done through a computer. Under this method, the commands and the actions that are sent from the system are performed on your Android device.

Several issues can be resolved, and multiple functions can be performed using the ADB format tool and Fastboots, and this also includes removing the FRP lock on your Android device. To use this method, USB debugging should be enabled on the Motorola Defy 2 device.

For specific brands of Android phones, specific utility tools are available like the Vivo ADB format tool and the Samsung ADB format tool, which are used explicitly for Vivo and Samsung phones, respectively.

2. How Do ADB and Fastboot Bypass FRP?

Using the versatile ADB command-line tool and Fastboots, the Google FRP lock can be removed using several commands depending on the OS version. This is a client-server program that includes a client who sends the commands, a daemon used to run the commands on the Motorola Defy 2 device, and a server that facilitates communication between the client and the daemon.

ADB comes included in the Android SDK Platform-Tools package, and this can be downloaded using the SDK manager.

3. What Are the Android Versions that ADB and Fastboot Command Support?

The Android versions on which ADB and Fastboot commands can be used are as follows:

• _Android 5 – Lollipop_
• _Android 6- Marshmellow_
• _Android 7 – Nougat_
• _Android 8- Oreo_
• _Android 9- Pie_
• _Android 10 – Q (expected to work though not tested as yet)_

Part 2: How to Set Up ADB and Fastboot Commands to Remove FRP Lock on Android?

To remove FRP lock using ADB, you first need to install and set up ADB and then remove them using the command. The steps for the same are enlisted below.

Steps to remove FRP using ADB

• Step 1. Firstly, download the ADB installed setup file and then extract the files from the toolkit on your system in a folder.

• Step 2. Next, you need to run adb.setup.exe and then type Y for installing the drivers for ADB and Fastboot.

• Step 3. Again, enter Y for installing the drivers and when done successfully, the command window will close.

• Step 4. Next, power on your Android device and connect it to your PC using a USB cable. Here also ensure that USB debugging mode is enabled on your Android device.

• Step 5. Next, hold down the Shift key and then right-click at any place blank in the ADB folder, and then choose the Open command window here option.

• Step 6. Now to remove the FRP you need to enter the following commands at the command prompt one by one where enter needs to be clicked after every line.

• _Adb shell am start -n com.google.android.gsf.login/_

• _adb shell am start -n com.google.android.gsf.login.LoginActivity_

• _adb shell content insert –uri content://settings/secure –bind name:s:user_setup_complete –bind value:s:1_

• Step 7. The above commands are for Samsung devices. If you want to remove the FRP on other brands, enter the following commands:

• _Adb shell content insert –uri content://settings/secure –bind_

• _name:s:user_setup_complete –bind value:s:1_

After the execution of the commands, the FRP lock will be removed from your Android device.

Steps to remove FRP using Fastboot

• Step 1. Put the Android device into the bootloader or fastboot mode. (depending on the model and brand of your Android device, the process of entering into the fastboot will differ).

• Step 2. Connect your phone to your PC using a USB cable.

• Step 3. Next, depending on the system, enter the following command in the CMD window:

• _Lenovo FRP command_

• _fastboot erase config_

• _fastboot reboot_

• _XIAOMI FRP command_

• _fastboot -w_

• _MICROMAX YU YUPHORIA FRP_

• _Fastboot -i 0x2a96 erase configFastboot -i 0x2a96 reboot_

• _DEEP/HTC/Other Brands FRP_

• _fastboot erase configfastboot reboot_

Part 3: Limitations of Using ADB and Fastboot Command Method

The ADB and Fastboots command is a workable solution for removing the FRP lock on your Android device, the drawback is that the method is quite complicated and requires thorough technical know-how of ADB and its working. There are several limitations associated with this method as enlisted below.

• Requires technical know-how

To remove FRP using the ADB command you need to have a thorough knowledge of using the tool. The tool has a deep learning curve which makes this method little for the majority of the users.

• Might not unlock the phone

You can try the ADB method for removing the FRP lock but there is no guarantee that the results will be positive and your device will be unlocked.

• Issues with the drivers

Several times while using this method, you might encounter driver issues when your device is not detected as proper drivers are not installed.

• Unexpected issues and errors

ADB is a command-based method, and thus it is important that the commands are entered right. If there is a slight error in the typing of the command, it might lead to major issues and can even be the Motorola Defy 2 device damaged.

• The process is not user-friendly

ADB is a technical process aimed toward the geeks, and thus the overall process is not user-friendly and complicated.

Part 4: The Best ADB Alternative to Bypass FRP Lock on Android Phones

Considering the several limitations of the ADB and Fastboot command method, the need for a simple, user-friendly, and workable solution for removing FRP lock on Android devices arises. One of the best software here that we recommend is Dr.Fone - Screen Unlock (Android) which helps in removing and bypassing many Android phone screen locks including the one appearing due to FRP lock.

Dr.Fone - Screen Unlock (Android)

Remove Google FRP on Samsung without PIN code or Google accounts.

• Pattern, PIN, password, fingerprints & face screen lock can all be unlocked.
• Bypass Google FRP on Samsung without pin code or Google accounts.
• No tech knowledge asked, everybody can handle it.
• Work for Samsung, Xiaomi, Redmi, OPPO, etc.

4,005,551 people have downloaded it

The process of using the software is user-friendly and thus can also be used by non-techy users.

Steps for removing FRP lock on Android using Dr.Fone Screen Unlock

• Step 1. Launch the installed software and choose the Screen Unlock option from the main interface. Choose Android and then select the Remove Google FRP Lock option.

• Step 2. Select the model brans from the options shown on the interface, and then connect your phone to your PC using a USB cable. The connected device details will appear on the interface.

• Step 3. Follow the next steps as they appear. Once the FRP lock is successfully removed, the prompt window will show its completion. Click Done if you have successfully executed the process.

The above is the brief steps for the process. You can check the bypass Samsung FRP lock guide in detail.

Conclusion

If you are well versed with the commands of ADB and Fastboots you can go ahead and use the ADB bypass FRP tool for removing the FRP lock but if this command line method seems complicated for you, Dr.Fone Screen Unlock is the best tool to use.

About Motorola Defy 2 FRP Bypass

To ensure that your phone data and details do not leak to unauthorized people, several security features on Android devices are set and one of them is Factory Reset Protection. Under this feature, the Google Account ID and password have to be entered for factory resetting your device. If you are an authorized owner, this should not be an issue in an ideal situation, but what if you have forgotten your Google details? How will your factory reset now? No need for panic as there are workarounds available.

So, for Motorola FRP bypass when you have forgotten your Google details or have purchased a second-hand device with a lock, we will help you with the best possible solution.

Part 1. Can I Solve Motorola google Locked?

If you know the Google ID and the password of your device, the Motorola google locked can be easily opened. But if you have forgotten the details or do not have them, you will have to look for the methods that can let you bypass this lock and have access to the Motorola Defy 2 device. For process FRP bypass for Motorola, we have listed the best methods for bypassing the Google lock in the following parts of the topic.

Part 2. How to Get Motorola FRP Bypass without OTG

One of the most widely used methods to bypass the Motorola FRP lock is Swift Key and this is a free solution that does not require any software download or installation.

Steps for Motorola bypass google account

Step 1. First of all, reset your Motorola device and then turn it on.

Step 2. Choose your preferred language and then click on the Start.

Step 3. Connect your device to a WIFI network and start the configuration.

Step 4. Next, keep skipping the steps till you arrive at the Verify Account screen.

Step 5. Click on the email address that will activate the keyboard and now to get access to the Swift Key keyboard, click on the menu icon on the keyboard.

Step 6. Next, select Settings > Languages. If you are asked for the Google Account sign-in choose the No, Thanks option.

Step 7. At the Google search bar, type Settings and then choose the Settings option.

Step 8. If the Swift Key menu appears, choose Got it > Not Now > Back-Up Reset.

Step 9. Now choose the Factory Data Reset option for resetting your device.

Finally, when you switch on your phone again, the FRP lock will not appear, and you’ve got FRP Motorola disabled.

Part 3. How to Bypass Google Verification on Motorola Without SwiftKey

If the SwiftKey method is not working for removing the FRP lock, another way is to use the APK tools. There are several APK files available to get this task done like FRP Bypass APK, Pangu FRP bypass, and more. Depending on the model of your device, you can choose a free or a premium version as available.

To bypass FRP lock using this method, you would need an APK file, OTG cable, USB stick, and an internet connection that is stable.

Steps Motorola FRP Bypass Tool APK

• Step 1. Restart your device and choose Language > English > Next.
• Step 2. Skip the option of Insert SIM card and then connect your Motorola Defy 2 to a stable WiFi network.
• Step 3. Transfer the downloaded APK file to the USB drive.
• Step 4. Connect the SUB drive to the Motorola Defy 2 device using an OTG cable.
• Step 5. Transfer and install the APK file to your Motorola device. During the APK installation process, security certification permission needs to be provided.
• Step 6. After the APK installation is done successfully, access to the phone settings will be provided after which you can find the synced Google Account data and delete the same. Alternatively, you can also delete all the settings of the phone.

With the above steps, the FRP lock will be bypassed and removed.

Part 4. How to Delete a Google Account on Motorola after Factory Reset

Removing the FRP lock can put your device at risk if it lands into unauthorized access, but if you find hassle in remembering the Google Account details and doubt you can easily forget it, removing the associated Google account is better as it will also disable the FRP lock.

Also, if you are selling your phone or gifting it to someone, then remove the associated Google Account so that the new owner does not have any issues with the factory reset of the Motorola Defy 2 device.

Steps for removing the Google Account from Motorola Phone

• Step 1. On the phone home screen, click on the Settings icon and then look for the Passwords & Accounts option.

Note: The option can also be looked at Users & accounts section.

• Step 2. Click on the Accounts option and the list of the associated and linked accounts will appear.
• Step 3. Select the Google account that you want to delete and then click on the Remove account option.
• Step 4. Again, click on the Remove account option to confirm deleting the account.
• With the steps above, the synced account will be deleted and thus the FRP lock will be removed.

Part 5. How to Bypass Screen Lock from Motorola

Nothing can be more annoying than forgetting the screen lock of your Motorola phone as it will prevent you from getting access to the Motorola Defy 2 device and using any of its functions. So, if you too are in a similar situation when you have forgotten the set password, Dr.Fone –Screen Unlock (Android) is the recommended tool.

safe & secure

This professional Windows and Mac-based software will let you remove all types of screen locks including password, PIN, pattern as well as fingerprint, in just a few simple steps. The software is simple to use and can remove the screen lock on all popular Android devices in a hassle-free manner.

Dr.Fone - Screen Unlock (Android)

Get into Locked Motorola without Password [Most Efficient]

• Easily remove the lock screen; No need to root your device.
• Bypass Android FRP lock without a PIN or Google account.
• Support 20,000+ mainstream models of Android phones & tablets.
• Provide specific removal solutions to promise good success rate

4,008,669 people have downloaded it

Steps to remove screen lock from Motorola using Dr. Fone-Screen Unlock (Android)

Step 1. Launch the Dr. Fone software on your system and choose the Screen Unlock option on the main page.

Step 2. Using a USB cable, connect your phone to your PC, and then on the software interface choose Unlock Android Screen option.

Step 3. Next, choose the phone model from the given list so that the right recovery package can be downloaded.

Step 4. Next, you need to put your phone into specific. Dr.Fone will start to unlock Android screen after getting into the specific mode.

Step 4. Wait for the unlock process to complete, the screen lock will be removed and the Motorola Defy 2 device can be now accessed.

safe & secure

Conclusion

Above we have listed different tools for Motorola Google bypass. Depending on the model of the phone and requirements, you can choose the best suitable solution. Also, for removing screen lock on Motorola and other devices, Dr.Fone - Screen Unlock (Android) works as an excellent tool.