5 Quick Methods to Bypass Huawei P60 FRP

Google Factory Reset Protection, a.k.a FRP, is developed by Google for all Android phones. It adds an extra layer of security to your phone and the data on it. It is aimed at making it difficult for the illegal holder of your phone to factory reset your phone and remove tracking information. Then why do we need to discuss the Huawei P60 FRP bypass?

Though the protection is meant for you, sometimes you may forget the password and want your Huawei P60 FRP removed. Also, if you bought a used phone and the previous user has set up FRP with her password, you need to bypass it.

Part 1: In what cases does the Huawei P60 FRP bypass works?

How and why should I bypass Huawei P60 FRP? Let us look at the valid reasons.

1. Buy a locked second-hand Huawei

When you buy a second-hand phone, ideally, the previous user must format and hard reset the Huawei phone to remove all locks and password requirements. However, if it doesn’t happen, you cannot use some options on your phone and configure security because of FRP. Here, your savior is the option of the Huawei P60 FRP bypass.

2. Forget Google account ID and password

Even if you have locked your Huawei phone yourself, you are stuck when you forget your Google username and password. So, you can only recover your phone using the Huawei P60 FRP bypass.

3. The person with a Huawei from his company no longer works for it

Some employees also receive official phones from their company which they have to return when they leave the company. Now, it becomes a horror story for the new employee if he gets the same phone locked with the previous user’s ID.

Part 2: 5 quick methods to bypass Huawei P60 FRP

Ok, now this is established that there are certain situations when you need to conduct a Huawei P60 FRP bypass. So how do you do the Huawei P60 FRP bypass?

Click here

### Method 1. Retrieve your Google account from another device

If your phone is locked with a Google account whose password you do not know or have forgotten, then you can use this method to Huawei P60 FRP bypass. In this method, you can try to retrieve your Google account from another device. It is a simple step-by-step process tha can be completed from a PC or another mobile device.

If you have forgot the email address but remember the password, then follow these steps.

1. Navigate to Google’s Find My Email page in your browser.

When you can’t remember the email address that was configured, go to the Find My Email page and start account recovery process.

2. Enter your recovery email or phone number

On the next screen, provide a recovery email or phone number and click Next.

3. Provide your first and last name

Enter your first and last name in the given form and click Next.

4. Verification code

Google will send a verification code to the setup recovery email or phone number, click Send.

5. Verification code entry

Check your email inbox or phone messages depending on the recovery method and find the verification code. Enter it in the given form. If it is correct, you can go to the next final step.

6. Choose an account

From the list of accounts showing on the screen, select the account you want to recover.

7. Enter your password

Enter the password in the text box and you are done.

If you remember the email but not the password, then the Huawei P60 FRP bypass method will go like this.

1. Google’s Account Recovery page

Navigate to the Account Recovery page from the browser on your PC or other mobile devices.

2. Enter your email address

Fill in the form with your Google account and click Next.

3. Enter the last password you remember

The next form will ask you to enter the last password you remember and that worked

Now, you will receive a message to your registered device, to verify it’s you. Open it and click , Yes, it is me.

Now, wait for six hours for Google to verify it’s you and then they will send a password reset link to your email.

Now, what if you can’t remember your last password, then use the next method.

4. Click on “Try another way”

Now Google will send a message to your phone to verify it’s you. On your phone, open the message and click Yes, it’s me.

After verification, Google will send you a password reset link after six hours.

If your phone is not registered in your Google account then, try the next method.

5. Click on “Try another way” again

If your phone is enabled to check for the code, click Try another way again.

Google will then ask you to send a verification code to your registered phone number. Click Send.

Find the code from your messages, enter it, and click Next.

Now again, you will wait for six hours till Google sends the password reset link to your email.

Method 2. Use FRP Bypass APK

FRP bypass APK is another tool you can use to Huawei P60 FRP bypass easily. Let us see how it works step by step.

• Download FRP Bypass APK for Huawei P60 FRP bypass android 11.
• Once it’s downloaded, open the File Manager using the Open Files app
• Find the suitable Apk and click on it
• Install & open the APK.
• Open the browser on your phone.
• Launch any of these two below URL.
  • https://tiny.cc/frptools
  • https://bit.ly/2NKxXYs
• Go to the FRP bypass APK >FRP APPS section
• Open Settings leading to the Huawei P60 device Settings>System Settings> Backup & Reset >Reset Phone
• Now click on Reset System Settings Only, and confirm Reset System Settings Only.
• Select Erase All data and confirm.
• Your device will be rebooted.
• Wait till the factory reset process completes.

Now, reboot your device and set it up according to your requirements.

Method 3. Deactivate FRP

Another way to come around Huawei P60 FRP bypass is to deactivate FRP. Let us follow the step-by-step process.

1. Launch the “Settings” app and scroll to the Apps.
2. Click on the “Manage apps” (applications) and then the “All” tab.
3. Open “Google App.”
4. Click on the “Clear cache” to remove the Google account cache.

5. Also, clear all data to erase data stored.
6. Click the “Back” button, and go to “Gmail.”
7. Click on the “Clear cache” and “Clear data.”

8. In the Huawei P60 device Settings menu and click “Data synchronization.” When your device asks you to enter your Google account, enter your new Gmail account.

You have successfully completed the Huawei P60 FRP bypass process.

Method 4. Bypass with SideSync

You can use SideSync to share the screen and data between your computer and mobile phone. How can we use this for FRP bypass?

1. Download the SideSync from the official site and install the SideSync application on your computer.

2. Connect your phone and computer to the Google account verification screen.
3. Now plug in the first end of your OTG adapter with your phone and connect another end to the flash drive with APK.
4. Your phone will launch the file explorer automatically, showing the root directory of the flash drive.
5. Now click on the APK file.
6. Click Settings and allow to install from Unknown sources, and click OK.
7. After installation, open SideSync.
8. Disconnect the OTG cable from your Samsung phone.
9. Now access the Settings menu and go to the Backup & reset option and conduct a factory reset.

Method 5. 3 Steps to Bypass Huawei FRP Bypass

Dr.Fone - Screen Unlock (Android) is a reliable and efficient tool designed to help users bypass FRP (Factory Reset Protection) locks on Android devices, including Huawei smartphones. This powerful software provides a hassle-free solution for those locked out of their Huawei devices due to FRP lock. With its user-friendly interface and advanced features, Dr.Fone makes FRP bypassing a straightforward process, even for users with limited technical knowledge.

Dr.Fone - Screen Unlock (Android)

Remove Google Lock (FRP) from Huawei Devices

• Pattern, PIN, password, fingerprints & face screen lock can all be unlocked.
• Bypass Android FRP lock without a PIN or Google account.
• Unlock mainstream Android brands like Samsung, Huawei, Xiaomi, etc.
• No tech knowledge required, Simple, click-through, process.

3,981,454 people have downloaded it

3 Steps to Bypass Huawei FRP Lock with Dr.Fone - Screen Unlock (Android)

• Step 1. After installing Dr.Fone - Screen Unlock (Android), launch the program and select the “Screen Unlock” option from the main menu. Continue to Android > Remove Google FRP Lock.

• Step 2. Then select Huawei and click the Start button to continue. Then, connect your locked Huawei device to the computer using a USB cable. Ensure that USB debugging is enabled on your Huawei device before proceeding with the next steps.

• Step 3. Once your Huawei device is successfully connected, Dr.Fone - Screen Unlock (Android) will automatically detect it. Follow the on-screen instructions to put your Huawei device into specic mode. Once in the correct mode, Dr.Fone will start downloading the necessary firmware to bypass the FRP lock.

During the process, it’s crucial to keep your device connected to the computer and refrain from disconnecting it until the bypass is complete. After the firmware download is finished, Dr.Fone will initiate the FRP lock bypass process. Once completed, your Huawei device will restart, and you’ll regain access to it without encountering the FRP lock.

safe & secure

The Bottom Line

FRP is a great feature to add security to Android phones. However, sometimes it is necessary to bypass it to fully use your phone. When you are stuck with an FRP lock, it is a frustrating situation, especially when you want to factory reset your phone. We have described various methods so that you choose the best solution according to your requirements for the Huawei P60 FRP bypass. Among them, bypassing Huawei FRP lock is made simple and efficient with Dr.Fone - Screen Unlock (Android). Say goodbye to FRP lock frustrations and regain access to your Huawei device swiftly with Dr.Fone - Screen Unlock (Android) .

safe & secure

Latest Guide: How To Bypass Huawei P60 FRP Without Computer

Smartphones, whether iPhone or Android, are really important in our daily lives these days. They store a lot of professional and private information. To keep their users safe, smartphone companies have added different security measures. One of these security features is called Factory Reset Protection (FRP). It stops unauthorized people from getting into a phone after resetting it.

Even though this is an important security measure, it can sometimes be annoying. This is true for Huawei smartphone users who can’t access their phones because they forgot their login details. Fortunately, there are ways for Huawei P60 FRP bypass without a PC. This article will present you with the latest guide on how to bypass Huawei P60 FRP .

• Part 1: What’s Huawei P60 FRP Code and How To Use It
• Part 2: How To Bypass Huawei P60 FRP With Other Methods
• Part 3: How To Disable Huawei P60 FRP Easily

Part 1: What’s Huawei P60 FRP Code and How To Use It

Huawei smartphones incorporate a security measure called the FRP (Factory Reset Protection) code. It is also called a bypass or Google account verification code. This feature is implemented to safeguard the Huawei P60 device from unauthorized access. The code usually activates following a factory reset. To regain full access to the Huawei P60 device, users are required to input the Google account credentials associated with the Huawei P60 device.

The Huawei P60 FRP code serves as a protective barrier. It prevents unauthorized individuals from utilizing the Huawei P60 device after it has been reset. By requesting the Google account credentials tied to the Huawei P60 device, it acts as an extra layer of security. This ensures that only authorized users can access and operate the Huawei P60 device. In essence, the Huawei P60 FRP code is an integral security feature that reinforces user authentication.

It prevents unauthorized access to the Huawei P60 device, providing additional protection. Each Huawei device possesses a distinct FRP (Factory Reset Protection) code. It is linked to the Google account that was previously synchronized with the Huawei P60 device. It activates when you perform a factory reset on your Huawei smartphone without signing out of the associated Google account.

Usage of Huawei P60 FRP Code

To use the Huawei P60 FRP code effectively on your FRP-locked Huawei smartphone, follow these simplified steps:

Get the FRP Code

There are a few methods to get the FRP code. You can reach out to Huawei customer support for help and guidance. They can help you obtain the specific FRP code for your Huawei model. You can also search online to find reliable sources that share FRP codes. Several online platforms and forums cater to users sharing FRP codes. It ensures you find the appropriate code for your device.

Enter the FRP Code

Once you have obtained the FRP code, such as *#812#, power on your Huawei smartphone and proceed through the initial setup steps until you encounter the FRP lock screen. At this point, the Huawei P60 device prompts you to enter your Google account credentials. However, enter the FRP code you obtained instead of inputting your credentials. Typically, the FRP code comprises a numeric sequence specific to your device.

Complete the Setup

After entering the FRP code, the Huawei P60 device undergoes a verification process. It will authenticate the code and unlock the FRP lock. Once the authentication is successful, you can proceed with the setup process. This includes signing in with your Google account or creating a new one.

Limitation of Huawei P60 FRP

Remember that FRP codes can differ based on your Huawei smartphone model and software version. Recognizing that using an FRP code obtained from unofficial sources can pose security risks is crucial. To ensure the safety of your device, it is recommended that you get the FRP code from trusted sources.

Part 2: How To Bypass Huawei P60 FRP With Other Methods

Apart from the Huawei P60 FRP bypass code, other methods are available to bypass the FRP lock. These methods range from using built-in tools within Huawei phones to using third-party software. Given below are three alternative ways to bypass Huawei P60 FRP:

Method 1: Using Official Google Account

The FRP lock on your Huawei smartphone is closely linked to the Google account. The whole reason you are facing this situation is that you don’t remember your Google account password. It means the FRP lock can be bypassed if you can recover your Google account. To recover your Google account, you can use the following steps:

• Step 1: On your computer, use a browser to access the Google Sign-in page. Here, type your Google account email, and when it comes to password, choose “Forget Password.”

• Step 2: Now, use the recovery phone number or email associated with your Google account to receive the verification code. Afterward, create a new password and wait for around 24 hours. Once Google has synced the new password across devices, you can sign in and bypass the FRP lock.

Method 2: Using Third-Party FRP Bypass Apps

There are many third-party tools available that can help you bypass the Huawei P60 FRP lock. One of these tools is Dr.Fone - Screen Unlock (Android) . This tool is considered to be the best when it comes to bypassing FRP lock. It provides a powerful screen unlock feature that can bypass many locks on Android devices. These locks include passwords, PINs, patterns, fingerprints, and face locks.

Wondershare Dr.Fone also supports over 2000 Android devices from 15+ brands for screen unlocking. These include all major brands like Samsung, Xiaomi, Huawei, OPPO , and others.

Dr.Fone - Screen Unlock (Android)

New method Bypass Google Account All VIVO Devices

• Pattern, PIN, password, fingerprints & face screen lock can all be unlocked.
• Bypass Android FRP lock without a PIN or Google account.
• Unlock mainstream Android brands like Samsung, Huawei, LG, Xiaomi, etc.
• No tech knowledge required, Simple, click-through, process.

3,981,454 people have downloaded it

Here are the detailed steps to bypass the Huawei P60 FRP lock:

• Step 1: Choose Screen Unlock in Wondershare Dr.Fone

After launching Wondershare Dr.Fone on your computer, move to the “Toolbox” tab. Here, choose “Screen Unlock,” and on the next screen, select “Android.”

• Step 2: Select Huawei as the Brand

The next option you need to select is “Remove Google FRP Lock”. Afterward, choose “Huawei” as the brand and click “Start”. Now the program will download the relative driver.

• Step 3: Bypass the Huawei P60 FRP Lock

Once the driver is downloaded, switch off your Huawei device. Now connect it to the computer, and while connecting, press and hold the “Volume Up” and “Volume Down” buttons simultaneously. Release the buttons after 3 seconds. Now the process of bypassing FRP will start, and it will take a few minutes to complete.

safe & secure

Part 3: How To Disable Huawei P60 FRP Easily

Factory Reset Protection (FRP) is an important security feature that safeguards your data. However, there may be instances where you find it necessary to disable FRP. Disabling FRP can be helpful if you want to have complete control over your device. It will help you avoid any potential complications that may arise from FRP activation.

In this section, we will guide you through the process of disabling Huawei P60 FRP easily. Thus, allowing you to have more control over your device. Given below are the steps to disable Huawei P60 FRP:

• Step 1: On your Huawei smartphone, access Settings and scroll down to the last option, “Account & Sync.” Tap “Accounts & Sync,” and on the following screen, find the Google Account you want to remove.

• Step 2: Here, tap the Google account and choose “Delete Account” on the next screen. Confirm your action by tapping “OK,” and the Google account will be removed.

Conclusion

In this comprehensive guide, we have explored various methods for Huawei P60 FRP bypass without a PC. We discussed the Huawei P60 FRP code method, followed by three alternative techniques. These included built-in Huawei tools, an official Google account, and Wondershare Dr.Fone. These methods provide viable options for Huawei smartphone users locked out of their devices.

Each method has its own merits and limitations. However, we recommend considering Wondershare Dr.Fone - Screen Unlock (Android) as the best choice for bypassing Huawei P60 FRP. Wondershare Dr.Fone is a trusted and reliable Huawei P60 FRP bypass tool. It offers extensive device compatibility and reliable FRP bypass capabilities.

The Updated Method to Bypass Huawei P60 FRP

Android smartphones have a security feature called FRP (Factory Reset Protection) that shields user data from theft or loss. Like other manufacturers, Huawei uses FRP as a security feature to make sure that, in the event of a factory reset, only the original owner with the Google account credentials linked with the Huawei P60 device would be able to access the Huawei P60 device. This aids in preventing the Huawei P60 device’s theft or unauthorized use.

FRP, however, can also be a problem if a user forgets their Google account login information or loses access to their device. Our step-by-step method will walk you through the most effective ways to bypass FRP on Huawei P60 devices in 2023, ensuring you can regain access to your device without any hassle. Say goodbye to FRP Xiaomi and Huawei P60 FRP challenges with our complete method.

We have included more than two ways to unlock your mobile without any hassle and complication. Just follow this guide, and you will regain access to your device in no time.

Part 1: Precautions To Take Before and After FRP Bypass?

Precautions are necessary for a safe and effective process when overcoming FRP (Factory Reset Protection) on your Huawei P60 device. In order to safeguard your data, guarantee device performance, and maintain device security, we’ll highlight the essential steps you should take before the Huawei FRP bypass.

Precautions:

• Backup Your Data: In order to prevent data loss during FRP bypass, be sure to back up all vital information from your smartphone, including contacts, pictures, videos, and documents, to a secure location.
• Charge the battery: To prevent any delays during the FRP bypass procedure, ensure your device has enough battery life or is connected to a charger.
• **Conduct Thorough Research:**To prevent any potential threats or damage to your device, conduct thorough research and follow instructions from reliable sources or respected guidelines.

Part 2: How to remove Huawei P60 FRP with the most reliable software - Dr.Fone?

Wondershare Dr.Fone - Screen Unlock (Android) is well-known for its ease to use and data-security. The Unlock Android Factory Reset Protection feature helps you enter home screen without effort. Dr.Fone not only supports Huawei FRP bypass, it also supports other device brands, such as Samsung , OPPO , etc.

Dr.Fone - Screen Unlock (Android)

Huawei P60 FRP Lock Removal Made Easy

• Pattern, PIN, password, fingerprints & face screen lock can all be unlocked.
• Bypass Android FRP lock without a PIN or Google account.
• Unlock mainstream Android brands like Samsung, Redmi, Xiaomi, etc.
• No tech knowledge required, Simple, click-through, process.

3,981,454 people have downloaded it

Check the following steps to see how to bypass Huawei FRP with Wondershare Dr.Fone.

Step 1: Launch Wondershare Dr.Fone first and choose Toolbox > Screen Unlock > Android.

Step 2: Select Remove Google FRP Lock.

Step 3: Choose Huawei among the Huawei P60 device brands.

Step 4: Dr.Fone will start to download driver. And then turn off the Huawei P60 device and connect to the computer. During the connecting process, please keep pressing Volume Up and Down button simultaneously for around 3 seconds.

Step 5: Wait for a few minutes and when it’s done, click Done button.

Part 3: How To Bypass Huawei P60 FRP in Traditional Method

With each phone, operating system, and version of Android having its own technique, bypassing Huawei FRP on the most recent versions of Google’s operating system is becoming increasingly challenging. You can use the FRP bypass software that works with your device to employ the free FRP bypass approach.

• Click Add Network at the bottom of the screen in network settings.

• In the SSID field, type any random text you like and long-press to pick it. To share it with Gmail, tap the share icon. Tap Notifications > Additional Settings on the App Info screen.

• Click the three dots in the top right corner and select “Help and Feedback.”

• Open the search bar and type “Delete and disable apps on Android.” Tap “Tap to go to Application Settings” on the following screen.

• Enable the Accessibility Menu Shortcut by selecting Settings > Additional Settings > Accessibility > Accessibility menu.

• Repeat the back button to go back to the App info screen. Click More, then select Show System.

• Tap Disable and Disable app after choosing Android setup, then tap Force stop and OK.

• Return to the App info screen and select Carrier Services. Then, select Disable and Disable app. Finally, select Force to stop and OK.

• Go back to the App info screen, choose Google Play Services, and then touch Disable to remove the app. Click OK after tapping Force Stop.

• To get back to the Connect to the Network screen, press the back button and the Next icon.

• Tap the person icon in the lower-right corner of the screen to access Google Assistant > Settings on the Checking for Updates page. To access the Google Play services App information page, repeat this process numerous times. To enable Google Play Services, select Enable.
• Wait until the procedure is finished before going back to the Checking for Updates page. When the procedure is finished, select More, then select Accept.
• You can finally disable Xiaomi’s Google account verification when the Setup Complete page appears.

Part 4: How To Bypass Huawei P60 FRP With ADB Command on a PC?

ADB and Fastboots, which stand for Android Debug Bridge and Android Debug Bridge, respectively, are two ways that a computer can communicate with an Android smartphone. The commands and actions delivered by the system are carried out on your Android device using this technique.

Depending on the OS version, the Google FRP lock can be removed using a variety of commands using the flexible ADB command-line tool and Fastboots. This software uses a client-server architecture and a client that transmits commands.

• Download the ADB installed setup file first, and then extract the toolkit files to a folder on your computer.

• Run adb.setup.exe next, and then press Y to accept the prompt to install the ADB drivers.
• When the drivers have been successfully installed, type Y once more, and the command window will close.
• Next, please turn on your Android device and connect it to your PC using a USB cord. Ensure your Android device’s USB debugging mode is also on here.
• Then, while holding down the Shift key, right-click somewhere that is empty in the ADB folder and select the Open command window here.
• Then, to delete the FRP, run the following lines one at a time at the command prompt, pressing enter after each line. Below is the code for CMD.

• Your Android device’s FRP lock will be removed following the execution of the commands.

Part 5: How To Disable FRP Huawei P60?

Disabling FRP on Huawei P60/Poco devices is relatively simple. Once you’ve removed the Google account from your device, the FRP lock will be disabled, and you’ll no longer need to bypass Huawei FRP.

• Go to “Settings” from the menu.
• Go down the page and click “Accounts & Sync.”

• To delete a Google account, tap on it.
• Confirm your selection of “Remove Account” by clicking.

• You might be asked to enter your device password or PIN to finish the process.

Summary

In conclusion, unlocking Huawei P60 FRP can be difficult, but it can be done quickly with the correct tools. You can either use the traditional method, which may prove quite long. We would recommend using the Huawei FRP bypass tool. The top Huawei P60 Google FRP Unlock tools, such as Dr.Fone - Screen Unlock (Android) , have been covered in this article. Since Dr.Fone - Screen Unlock (Android) is an all-in-one solution for Samsung, Xiaomi, Redmi, Oppo, Realme, Vivo FRP unlocking, we advise readers to give it a try.