5 Quick Methods to Bypass Asus ROG Phone 8 Pro FRP

Google Factory Reset Protection, a.k.a FRP, is developed by Google for all Android phones. It adds an extra layer of security to your phone and the data on it. It is aimed at making it difficult for the illegal holder of your phone to factory reset your phone and remove tracking information. Then why do we need to discuss the Asus ROG Phone 8 Pro FRP bypass?

Though the protection is meant for you, sometimes you may forget the password and want your Asus ROG Phone 8 Pro FRP removed. Also, if you bought a used phone and the previous user has set up FRP with her password, you need to bypass it.

Part 1: In what cases does the Asus ROG Phone 8 Pro FRP bypass works?

How and why should I bypass Asus ROG Phone 8 Pro FRP? Let us look at the valid reasons.

1. Buy a locked second-hand Asus

When you buy a second-hand phone, ideally, the previous user must format and hard reset the Asus phone to remove all locks and password requirements. However, if it doesn’t happen, you cannot use some options on your phone and configure security because of FRP. Here, your savior is the option of the Asus ROG Phone 8 Pro FRP bypass.

2. Forget Google account ID and password

Even if you have locked your Asus phone yourself, you are stuck when you forget your Google username and password. So, you can only recover your phone using the Asus ROG Phone 8 Pro FRP bypass.

3. The person with a Asus from his company no longer works for it

Some employees also receive official phones from their company which they have to return when they leave the company. Now, it becomes a horror story for the new employee if he gets the same phone locked with the previous user’s ID.

Part 2: 5 quick methods to bypass Asus ROG Phone 8 Pro FRP

Ok, now this is established that there are certain situations when you need to conduct a Asus ROG Phone 8 Pro FRP bypass. So how do you do the Asus ROG Phone 8 Pro FRP bypass?

Method 1. Retrieve your Google account from another device

If your phone is locked with a Google account whose password you do not know or have forgotten, then you can use this method to Asus ROG Phone 8 Pro FRP bypass. In this method, you can try to retrieve your Google account from another device. It is a simple step-by-step process tha can be completed from a PC or another mobile device.

If you have forgot the email address but remember the password, then follow these steps.

1. Navigate to Google’s Find My Email page in your browser.

When you can’t remember the email address that was configured, go to the Find My Email page and start account recovery process.

2. Enter your recovery email or phone number

On the next screen, provide a recovery email or phone number and click Next.

3. Provide your first and last name

Enter your first and last name in the given form and click Next.

4. Verification code

Google will send a verification code to the setup recovery email or phone number, click Send.

5. Verification code entry

Check your email inbox or phone messages depending on the recovery method and find the verification code. Enter it in the given form. If it is correct, you can go to the next final step.

6. Choose an account

From the list of accounts showing on the screen, select the account you want to recover.

7. Enter your password

Enter the password in the text box and you are done.

If you remember the email but not the password, then the Asus ROG Phone 8 Pro FRP bypass method will go like this.

1. Google’s Account Recovery page

Navigate to the Account Recovery page from the browser on your PC or other mobile devices.

2. Enter your email address

Fill in the form with your Google account and click Next.

3. Enter the last password you remember

The next form will ask you to enter the last password you remember and that worked

Now, you will receive a message to your registered device, to verify it’s you. Open it and click , Yes, it is me.

Now, wait for six hours for Google to verify it’s you and then they will send a password reset link to your email.

Now, what if you can’t remember your last password, then use the next method.

4. Click on “Try another way”

Now Google will send a message to your phone to verify it’s you. On your phone, open the message and click Yes, it’s me.

After verification, Google will send you a password reset link after six hours.

If your phone is not registered in your Google account then, try the next method.

5. Click on “Try another way” again

If your phone is enabled to check for the code, click Try another way again.

Google will then ask you to send a verification code to your registered phone number. Click Send.

Find the code from your messages, enter it, and click Next.

Now again, you will wait for six hours till Google sends the password reset link to your email.

Method 2. Use FRP Bypass APK

FRP bypass APK is another tool you can use to Asus ROG Phone 8 Pro FRP bypass easily. Let us see how it works step by step.

• Download FRP Bypass APK for Asus ROG Phone 8 Pro FRP bypass android 11.
• Once it’s downloaded, open the File Manager using the Open Files app
• Find the suitable Apk and click on it
• Install & open the APK.
• Open the browser on your phone.
• Launch any of these two below URL.
  • https://tiny.cc/frptools
  • https://bit.ly/2NKxXYs
• Go to the FRP bypass APK >FRP APPS section
• Open Settings leading to the Asus ROG Phone 8 Pro device Settings>System Settings> Backup & Reset >Reset Phone
• Now click on Reset System Settings Only, and confirm Reset System Settings Only.
• Select Erase All data and confirm.
• Your device will be rebooted.
• Wait till the factory reset process completes.

Now, reboot your device and set it up according to your requirements.

Method 3. Deactivate FRP

Another way to come around Asus ROG Phone 8 Pro FRP bypass is to deactivate FRP. Let us follow the step-by-step process.

1. Launch the “Settings” app and scroll to the Apps.
2. Click on the “Manage apps” (applications) and then the “All” tab.
3. Open “Google App.”
4. Click on the “Clear cache” to remove the Google account cache.

5. Also, clear all data to erase data stored.
6. Click the “Back” button, and go to “Gmail.”
7. Click on the “Clear cache” and “Clear data.”

8. In the Asus ROG Phone 8 Pro device Settings menu and click “Data synchronization.” When your device asks you to enter your Google account, enter your new Gmail account.

You have successfully completed the Asus ROG Phone 8 Pro FRP bypass process.

Method 4. Bypass with SideSync

You can use SideSync to share the screen and data between your computer and mobile phone. How can we use this for FRP bypass?

1. Download the SideSync from the official site and install the SideSync application on your computer.

2. Connect your phone and computer to the Google account verification screen.
3. Now plug in the first end of your OTG adapter with your phone and connect another end to the flash drive with APK.
4. Your phone will launch the file explorer automatically, showing the root directory of the flash drive.
5. Now click on the APK file.
6. Click Settings and allow to install from Unknown sources, and click OK.
7. After installation, open SideSync.
8. Disconnect the OTG cable from your Samsung phone.
9. Now access the Settings menu and go to the Backup & reset option and conduct a factory reset.

Method 5. 3 Steps to Bypass Asus FRP Bypass

Dr.Fone - Screen Unlock (Android) is a reliable and efficient tool designed to help users bypass FRP (Factory Reset Protection) locks on Android devices, including Asus smartphones. This powerful software provides a hassle-free solution for those locked out of their Asus devices due to FRP lock. With its user-friendly interface and advanced features, Dr.Fone makes FRP bypassing a straightforward process, even for users with limited technical knowledge.

Dr.Fone - Screen Unlock (Android)

Remove Google Lock (FRP) from Asus Devices

• Pattern, PIN, password, fingerprints & face screen lock can all be unlocked.
• Bypass Android FRP lock without a PIN or Google account.
• Unlock mainstream Android brands like Samsung, Asus, Xiaomi, etc.
• No tech knowledge required, Simple, click-through, process.

3,981,454 people have downloaded it

3 Steps to Bypass Asus FRP Lock with Dr.Fone - Screen Unlock (Android)

• Step 1. After installing Dr.Fone - Screen Unlock (Android), launch the program and select the “Screen Unlock” option from the main menu. Continue to Android > Remove Google FRP Lock.

• Step 2. Then select Asus and click the Start button to continue. Then, connect your locked Asus device to the computer using a USB cable. Ensure that USB debugging is enabled on your Asus device before proceeding with the next steps.

• Step 3. Once your Asus device is successfully connected, Dr.Fone - Screen Unlock (Android) will automatically detect it. Follow the on-screen instructions to put your Asus device into specic mode. Once in the correct mode, Dr.Fone will start downloading the necessary firmware to bypass the FRP lock.

During the process, it’s crucial to keep your device connected to the computer and refrain from disconnecting it until the bypass is complete. After the firmware download is finished, Dr.Fone will initiate the FRP lock bypass process. Once completed, your Asus device will restart, and you’ll regain access to it without encountering the FRP lock.

safe & secure

The Bottom Line

FRP is a great feature to add security to Android phones. However, sometimes it is necessary to bypass it to fully use your phone. When you are stuck with an FRP lock, it is a frustrating situation, especially when you want to factory reset your phone. We have described various methods so that you choose the best solution according to your requirements for the Asus ROG Phone 8 Pro FRP bypass. Among them, bypassing Asus FRP lock is made simple and efficient with Dr.Fone - Screen Unlock (Android). Say goodbye to FRP lock frustrations and regain access to your Asus device swiftly with Dr.Fone - Screen Unlock (Android) .

safe & secure

A Step-by-Step Guide on Using ADB and Fastboot to Remove FRP Lock on your Asus ROG Phone 8 Pro

Factory Reset Protection is one of the security measures available on Android 5.1 and later devices to prevent intruders’ unauthorized factory resetting of the Asus ROG Phone 8 Pro device. Among the several ways to fix this issue and remove the lock, one is ADB and Fastboot commands. So, if you are aware of using Android Debug Bridge, the below content will help you understand how it can be used to remove the FRP lock.

You can watch the video below to bypass FRP lock without hassle!

Part 1: Quick Overview of ADB and Fastboot Commands

1. What are ADB and Fastboot?

Standing for Android Debug Bridge, ADB and Fastboots are the methods through which communication with an Android device can be done through a computer. Under this method, the commands and the actions that are sent from the system are performed on your Android device.

Several issues can be resolved, and multiple functions can be performed using the ADB format tool and Fastboots, and this also includes removing the FRP lock on your Android device. To use this method, USB debugging should be enabled on the Asus ROG Phone 8 Pro device.

For specific brands of Android phones, specific utility tools are available like the Vivo ADB format tool and the Samsung ADB format tool, which are used explicitly for Vivo and Samsung phones, respectively.

2. How Do ADB and Fastboot Bypass FRP?

Using the versatile ADB command-line tool and Fastboots, the Google FRP lock can be removed using several commands depending on the OS version. This is a client-server program that includes a client who sends the commands, a daemon used to run the commands on the Asus ROG Phone 8 Pro device, and a server that facilitates communication between the client and the daemon.

ADB comes included in the Android SDK Platform-Tools package, and this can be downloaded using the SDK manager.

3. What Are the Android Versions that ADB and Fastboot Command Support?

The Android versions on which ADB and Fastboot commands can be used are as follows:

• _Android 5 – Lollipop_
• _Android 6- Marshmellow_
• _Android 7 – Nougat_
• _Android 8- Oreo_
• _Android 9- Pie_
• _Android 10 – Q (expected to work though not tested as yet)_

Part 2: How to Set Up ADB and Fastboot Commands to Remove FRP Lock on Android?

To remove FRP lock using ADB, you first need to install and set up ADB and then remove them using the command. The steps for the same are enlisted below.

Steps to remove FRP using ADB

• Step 1. Firstly, download the ADB installed setup file and then extract the files from the toolkit on your system in a folder.

• Step 2. Next, you need to run adb.setup.exe and then type Y for installing the drivers for ADB and Fastboot.

• Step 3. Again, enter Y for installing the drivers and when done successfully, the command window will close.

• Step 4. Next, power on your Android device and connect it to your PC using a USB cable. Here also ensure that USB debugging mode is enabled on your Android device.

• Step 5. Next, hold down the Shift key and then right-click at any place blank in the ADB folder, and then choose the Open command window here option.

• Step 6. Now to remove the FRP you need to enter the following commands at the command prompt one by one where enter needs to be clicked after every line.

• _Adb shell am start -n com.google.android.gsf.login/_

• _adb shell am start -n com.google.android.gsf.login.LoginActivity_

• _adb shell content insert –uri content://settings/secure –bind name:s:user_setup_complete –bind value:s:1_

• Step 7. The above commands are for Samsung devices. If you want to remove the FRP on other brands, enter the following commands:

• _Adb shell content insert –uri content://settings/secure –bind_

• _name:s:user_setup_complete –bind value:s:1_

After the execution of the commands, the FRP lock will be removed from your Android device.

Steps to remove FRP using Fastboot

• Step 1. Put the Android device into the bootloader or fastboot mode. (depending on the model and brand of your Android device, the process of entering into the fastboot will differ).

• Step 2. Connect your phone to your PC using a USB cable.

• Step 3. Next, depending on the system, enter the following command in the CMD window:

• _Lenovo FRP command_

• _fastboot erase config_

• _fastboot reboot_

• _XIAOMI FRP command_

• _fastboot -w_

• _MICROMAX YU YUPHORIA FRP_

• _Fastboot -i 0x2a96 erase configFastboot -i 0x2a96 reboot_

• _DEEP/HTC/Other Brands FRP_

• _fastboot erase configfastboot reboot_

Part 3: Limitations of Using ADB and Fastboot Command Method

The ADB and Fastboots command is a workable solution for removing the FRP lock on your Android device, the drawback is that the method is quite complicated and requires thorough technical know-how of ADB and its working. There are several limitations associated with this method as enlisted below.

• Requires technical know-how

To remove FRP using the ADB command you need to have a thorough knowledge of using the tool. The tool has a deep learning curve which makes this method little for the majority of the users.

• Might not unlock the phone

You can try the ADB method for removing the FRP lock but there is no guarantee that the results will be positive and your device will be unlocked.

• Issues with the drivers

Several times while using this method, you might encounter driver issues when your device is not detected as proper drivers are not installed.

• Unexpected issues and errors

ADB is a command-based method, and thus it is important that the commands are entered right. If there is a slight error in the typing of the command, it might lead to major issues and can even be the Asus ROG Phone 8 Pro device damaged.

• The process is not user-friendly

ADB is a technical process aimed toward the geeks, and thus the overall process is not user-friendly and complicated.

Part 4: The Best ADB Alternative to Bypass FRP Lock on Android Phones

Considering the several limitations of the ADB and Fastboot command method, the need for a simple, user-friendly, and workable solution for removing FRP lock on Android devices arises. One of the best software here that we recommend is Dr.Fone - Screen Unlock (Android) which helps in removing and bypassing many Android phone screen locks including the one appearing due to FRP lock.

Dr.Fone - Screen Unlock (Android)

Remove Google FRP on Samsung without PIN code or Google accounts.

• Pattern, PIN, password, fingerprints & face screen lock can all be unlocked.
• Bypass Google FRP on Samsung without pin code or Google accounts.
• No tech knowledge asked, everybody can handle it.
• Work for Samsung, Xiaomi, Redmi, OPPO, etc.

4,005,551 people have downloaded it

The process of using the software is user-friendly and thus can also be used by non-techy users.

Steps for removing FRP lock on Android using Dr.Fone Screen Unlock

• Step 1. Launch the installed software and choose the Screen Unlock option from the main interface. Choose Android and then select the Remove Google FRP Lock option.

• Step 2. Select the model brans from the options shown on the interface, and then connect your phone to your PC using a USB cable. The connected device details will appear on the interface.

• Step 3. Follow the next steps as they appear. Once the FRP lock is successfully removed, the prompt window will show its completion. Click Done if you have successfully executed the process.

The above is the brief steps for the process. You can check the bypass Samsung FRP lock guide in detail.

Conclusion

If you are well versed with the commands of ADB and Fastboots you can go ahead and use the ADB bypass FRP tool for removing the FRP lock but if this command line method seems complicated for you, Dr.Fone Screen Unlock is the best tool to use.

AddROM Bypass: An Android Tool to Unlock FRP Lock Screen For your Asus ROG Phone 8 Pro

Are you an Android user? Have you reset your device and are now stuck at the Google FRP lock screen? If yes, you are not the only one who got into this scenario.

Many Android users need to reset their devices for any reason. But they don’t know that their devices are now protected with the new security feature called FRP. This lock requires Google credentials Image nameed to your locked device to access it.

However, in most cases, users don’t remember their Google ID and password. This is where AddROM Bypass steps in to help. This article will explore how you can use AddROM to unlock the FRP lock.

But before starting, let’s learn about AddROM!

Part 1. What is AddROM?

AddROM is a special tool designed to bypass the Factory Reset Protection (FRP) lock. This tool comes in various versions. Each version supports its relevant Android device.

However, the good thing about this tool is that you don’t need any PC or laptop to act. All you are supposed to do is download and install the AddROM APK file on your Android phone. After that, you can bypass the FRP lock in just a few minutes.

But if you have an Android phone with a version above 9.0, you can try an alternate method explained in this article. Let’s move further to the steps of using AddROM.

Part 2. How to Download and Use AddROM APK?

You must be wondering how to download the AddROM bypass on an already-locked device. Well, you cannot download it on a locked device. Therefore, you need an extra Android device for the help purpose. After you arrange the Asus ROG Phone 8 Pro device, you can download AddROM bypass from its official website.

Once you have downloaded and installed the AddROM APK file, you can follow the steps given below:

Step 1: First, you must ensure you have an active SIM card in your locked device. Once confirmed, put it aside and graph another phone in which you installed the AddROM.

Step 2: Open your browser and visit the official website of AddROM. Scroll down and download the “ HushSMS.apk“ file. Then go to “My Files“ > “Downloads “ and find HushSMS.apk to install it.

Step 3: After the app is installed, open it and click “WAP PUSH SL.“ Then enter the phone number of the locked device. Now, In the Message box, type “www.youtube.com/@addROMcom “ and click the “SEND WAP PUSH SL “ button.

Step 4: Wait for a while until the AddROM YouTube channel will automatically open on your locked phone. Click the “Menu“ icon at the top right corner and select “Terms & Privacy Policies.”

Step 5: After clicking Terms & Privacy Policies, a browser page will be opened. Click the search bar to type. Here, type “addrom.com/bypass,“ scroll down, and then download the relevant “Google Account Manager “ (GAM) APK.

Step 6: Also, you are supposed to download the “ FRP bypass APK“ file from the list. Once the downloading is finished, install both apps on your device.

Step 7: Open the FRP bypass APK app and click the “Menu“ icon at the top right corner. Click the “Brower sign-in“ option and sign in with the Google account you want. Then, restart your Android device.

After a restart, you won’t get to see the FRP lock again. It will be successfully removed. However, most users find this method very complex, and the success rate is also not guaranteed.

Part 3. Does AddROM Really Work?

The success rate of the AddROM bypass can only be endorsed from the reviews of previous users. They can tell us if the users successfully bypass the FRP locks with this tool. From anecdotal research, we have discovered that some users could bypass the lock.

However, there were a lot of users who reported that they regained access to their phones. On the contrary, we also discovered that some users complained about the inefficiency of this tool. It was also incompatible with various Android versions.

Part 4. Pros & Cons of AddROM

While these kinds of tools offer us a lot of benefits, they also have some drawbacks. In this section, we will explore some of the potential pros & cons of AddROM FRP bypass.

|
Pros

|

Cons

|
| — | — |
| It is available for free and can bypass the FRP lock on Android phones. | AddROM is not compatible with Android version 10 and above. |
| You don’t need a PC or laptop to use this tool. | There is no official support team, so you won’t get any assistance. |
| | Using AddROM may void the warranty of the Asus ROG Phone 8 Pro device you are using. |
| | Novice users may find the bypass process with AddROM complex. |

Sometimes, using APK files to remove the FRP lock may not work. Moreover, downloading them from untrusted platforms can cause security risks for your device.

Therefore, we recommend you go for a more effective and safer option. In the next section, we will discover the best alternative to AddROM APK to bypass the FRP lock.

Part 5. Editors’ Pick-Best Alternative to AddROM

Using unethical means to bypass the FRP lock can be troublesome. You may end up compromising the security or warranty of your device.

So, you need the best solution to remove the FRP lock, and Wondershare Dr.Fone - Screen Unlock (Android) is here to help you. It is the most effective and reliable way to remove the FRP lock. With this tool, you can regain access to your Android phone in just a few clicks. Not only FRP, but you can also remove PIN, pattern, password, and fingerprint lock.

Whether you forgot your password, lost your Google account, or bought a secondhand phone with FRP lock, Dr.Fone has got you covered.

The best thing is that you need to be a tech expert to use this tool. Its user-friendly interface makes it accessible to everyone. If you are impressed by these features, you must be wondering how to bypass the FRP lock using Dr.Fone. If yes, then let’s move forward and explore the steps to use this tool.

Dr.Fone - Screen Unlock (Android)

The Best AddROM Alternative to Bypass FRP and Solve Your Screen Locks

• Remove all Android screen locks (PIN/pattern/fingerprints/face ID) in minutes.
• Bypass the FRP lock of Samsung without a PIN or Google account.
• Everyone can handle the lock screen without any tech knowledge.
• Provide specific removal solutions to promise good success rate.

4,008,671 people have downloaded it

First, download and install the Dr.Fone app on your Laptop or PC. Then, follow the instructions given below:

Step 1: Launch Dr.Fone, and connect your Android device (We are taking Samsung as an example) via a USB cable or wireless connection. Once the Asus ROG Phone 8 Pro device is connected, click “Toolbox” > “Screen Unlock“ to open options on the new window.

Step 2: You will see two options on your screen. Select “Android“ and continue. Then, select “Remove Google FRP Lock“ and proceed.

Step 3: Now you will see options for multiple Android phone brands. We are removing the FRP lock of the Samsung phone. So, we will select Samsung and click the “Start“ button.

Step 4: Now, select the Android OS version of your phone and click the “Start “ button. However, if you are not sure about the Android version, you can select the “All Android Version (One-Click Removal) “ option.

Step 5: Here, you have to follow the on-screen instructions. Find the “ Emergency Call “ button on your Android and click it. Type #0# to open a secret menu. Then, click the “Next “ button on your computer screen.

Step 6: You will see a pop-up on your phone’s screen to activate USB debugging. After allowing it on your device, click “ Authorized“ on your Dr.Fone screen.

Step 7: Dr.Fone will start removing the FRP lock from your Samsung device. Once the process is completed, you will see the interface shown below. You can check your device. If it’s successful, you can click “Done.“ Otherwise, you can try again.

Did you see how easy it is to bypass the FRP lock with the help of Dr.Fone? There is no need to manually perform complex steps. Just a few clicks and you are done. However, if you still want to continue with the AddROM Samsung, you must consider some factors.

Part 6. Factors to Consider Before Using AddROM

Here are some factors that you should consider before using AddRombypass:

• Using AddROM APK may void your device’s warranty. It can impact future support from the manufacturer.
• Bypassing the FRP lock screen with this tool could risk your data and privacy. It can expose your data to vulnerabilities.
• Be aware of legal restrictions surrounding the use of AddROM. Make sure it is allowed in your jurisdiction to avoid legal consequences.
• Successfully using AddROM requires technical knowledge. Improper use may lead to device malfunction or data loss.
• Research feedback from other users who have used this tool to bypass FRP locks. It can help you to understand potential risks and benefits.
• Before using AddROM, ensure you have backed up important data on your device. It will help you to prevent loss during the unlocking process.

Conclusion

We all know that FRP locks can be annoying and cause you trouble. But thankfully, there are different ways available to bypass it. We hope you successfully removed the FRP lock and regained access to your Android phone.

Using AddROM FRP bypass is indeed a complex and time-consuming method. Some users couldn’t even follow all the steps and left the process in the middle. Whereas, Wondershare Dr.Fone - Screen Unlock (Android) is an easy and reliable alternative.

The best thing about this tool is it is not just limited to FRP bypass. There are many other features, such as data recovery, data manager, system cleaner, etc, offered by Dr.Fone .